How to fix the “ERR_CONNECTION_RESET” error in Chrome: 7 quick ways

How to fix the “ERR_CONNECTION_RESET” error in Chrome: 7 quick ways

If you’re receiving the “ERR_CONNECTION_RESET” error message, it means that your internet browser is unable to connect to the target website’s server. This usually indicates a client-side connection issue.

Error codeERR_CONNECTION_RESET 
Error typeConnection error
Error variationsThis site can’t be reached
This webpage is not available
The connection was reset
Hmmm… can’t reach this page
Error causesIncorrect internet settings
Network device issues
VPN, antivirus, or firewall interference
Outdated browser cache
Bad proxy

The ERR_CONNECTION_RESET error means that your browser failed to establish a connection with the website’s server. To put it simply, the website fails to load because the server cannot send data to your browser.

How to fix “ERR_CONNECTION_RESET” video tutorial

Learn seven methods to fix “ERR_CONNECTION_RESET” in our video tutorial.

Subscribe For more educational videos! Hostinger Academy

What causes the “ERR_CONNECTION_RESET” error?

On the Google Chrome browser, the “ERR_CONNECTION_RESET” error message looks like this:

The ERR_CONNECTION_RESET error page on Google Chrome.

If you use Mozilla Firefox, Microsoft Edge, or Internet Explorer, you might get a message such as “The connection was reset” or “Hmmm… can’t reach this page”.

In most cases, the “ERR_CONNECTION_RESET” error is caused by an issue with your internet connection (client-side) rather than an issue with the target website (server-side).

Here are some possible client-side causes of this error:

  • Network device issues. Your network device or router may be experiencing problems, such as overheating. An overheating router can slow down or even kill your internet connection.
  • VPN interference. The purpose of VPNs is to increase web privacy and freedom. Unfortunately, sometimes VPN servers encounter problems that may negatively impact your internet connection.
  • Antivirus or firewall interference. Antivirus and firewall programs protect your computer from viruses and malware. However, sometimes they can wrongfully identify safe websites as threats, blocking the connection.
  • Outdated browser cache. The browser cache improves browsing. It speeds up loading and personalizes the experience. Although an outdated cache can cause connection issues instead.
  • Bad proxy. A proxy helps internet users stay anonymous by masking their IP addresses. However, proxies are not immune to problems. A lousy proxy can make you lose your internet connection.
  • Incorrect or corrupted TCP/IP configuration. Correct TCP/IP settings allow computers to connect to the internet. If they’re misconfigured or corrupted, you may encounter connection issues.

An error like “ERR_CONNECTION_RESET” is not difficult to solve since you can fix it yourself. All you need to do is correct your machine’s settings or remove possible hindrances to your internet connection.

Hostinger web hosting banner

How to fix the “ERR_CONNECTION_RESET” error

In this section, we’ll explore seven methods to fix the “ERR_CONNECTION_RESET” error. We will explain each technique step-by-step.

1. Check if the website is working

“ERR_CONNECTION_RESET” is most often a client-side error. However, it can be caused by the website itself in rare cases. Check if the website is still working for other people to figure out whether there’s an issue with your machine.

To check if a website is working worldwide, use an online website server checker such as Website Planet’s Is It Down Right Now? tool.

All you have to do is type in the website’s URL into the tool and press Enter.

The webpage for Website Planet's Is It Down Right Now? website checker.

If the website’s server is down, you’ll have no choice but to wait until its administrators fix the issue. If you are the website’s owner, contact your hosting provider about the server downtime.

However, if you find out that the website is still up for everyone else, proceed to the following method.

2. Disconnect from VPN

Using a VPN has many benefits. This includes protecting your privacy and letting you access region-locked content. However, VPNs are not perfect – they can cause network connection issues from time to time.

If you use a VPN, try to disconnect from it and reaccess the problematic website.

Disconnecting from a VPN can be done via your VPN client. Here’s how to do it with a NordVPN account:

  1. Open the NordVPN client.
  2. Make sure you’re connected to a server and select Disconnect.
  3. Select how long you want to pause the VPN connection for.

If the error message persists, try the other methods.

3. Reboot your network device

Many issues with network connections can be solved by rebooting your network device or router. This is worth trying whenever you’re having internet problems, as this is one of the fastest and easiest methods.

Unplug your router’s power cable and wait for at least 10-30 seconds before plugging it back in.

If the issue persists, try opening the website using another device that’s connected properly to the same network. If the error message still appears, try contacting your internet provider.

4. Clear the browser cache

Google Chrome stores data in its cache to reduce loading speeds and offer personalized web experiences for users. Sometimes, the information in the browser cache may be outdated, causing connectivity issues.

To clear the browser cache on Google Chrome, follow these steps:

  1. Navigate to the three dots menu -> More tools -> Clear browsing data.
  2. From the Time range drop-down menu, choose All time.
  3. Make sure to select the browsing data, browsing history, cookies, as well as cached images and files.
The Clear browsing data settings in Google Chrome.
  1. Click Clear data.

5. Deactivate Antivirus and Firewall

Having an antivirus and firewall is essential to keep your computer protected. However, some firewall and antivirus software can incorrectly block perfectly safe websites.

If you’re sure that the website you’re trying to access is safe, try temporarily disabling your antivirus and firewall to see if this fixes the connection reset error.

The steps to disable firewall and antivirus software will depend on the software you use. Check its documentation if you’re unsure how to do it.

For Windows users, here’s how to disable the built-in antivirus and firewall programs:

  1. Open Settings -> Privacy & security.
  2. Click Virus & threat protection.
  3. Under Virus & threat protection settings, select Manage settings.
  4. Turn off Real-time protection.
The location of the Real-time protection switch on Windows.
  1. Go to Firewall & network protection.
  2. Open each network profile – domain network, private network, and public network. Then turn off Microsoft Defender Firewall.
The location of the Microsoft Windows Firewall switch on Windows.

After trying this method, don’t forget to turn your antivirus and firewall software back on. If you leave it off for too long, your computer will be vulnerable to viruses and malware.

6. Disable proxy server access

Proxies protect your web privacy by masking your actual IP address. Unfortunately, a proxy can also experience issues, such as overloading or a dead server.

If you use a proxy, try temporarily disabling your connection to it. Here’s how to do it via the Windows internet settings:

  1. Go to Control Panel -> Network and Internet -> Internet Options.
  2. Open the Connections tab.
  3. Choose the LAN settings option.
  4. Uncheck Use a proxy server for your LAN.
  5. Check Automatically detect settings.
The Local Area Network (LAN) Settings on Windows.
  1. Click OK.

Here’s how to change the proxy settings on a macOS device:

  1. Navigate to System Preferences -> Network.
  2. Select your active internet connection.
  3. Open the Advanced settings -> Proxies.
  4. Under Select a protocol to configure, uncheck all protocols and click OK.
The Proxies settings on macOS.

7. Reset TCP/IP settings

TCP/IP is one of the most important elements that allow a computer to connect to the internet. If the TCP/IP configuration is incorrect or corrupted, the data your computer sends to the network won’t be transferred. This can cause the connection reset error.

If all else fails, try resetting your TCP and IP settings. This action will revert all the changes back to the default settings.

Here’s how to reset TCP/IP network settings on a Windows operating system using the command line:

  1. Press Windows + R keys, type cmd, and click OK. Alternatively, you can open the Start Menu and search for Command Prompt. Be sure to run it as administrator.
  2. The Select Command Prompt window will appear.
The Command Prompt program on Windows.
  1. Type each of the following commands into the command prompt and hit Enter one by one. Do not run them altogether.
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

Here’s how to reset TCP/IP on macOS:

  1. Navigate to System Preferences -> Network.
  2. Select your active internet connection.
  3. Open Advanced -> TCP/IP.
  4. Click Renew DHCP Lease.
The location of the Renew DHCP Lease button on macOS.

Conclusion

The “ERR_CONNECTION_RESET” error message means that your browser has failed to establish a connection with the webserver.

In this tutorial, we have explored seven ways to fix the ERR_CONNECTION_RESET error:

  1. Check if the website is working. Although rare, a server issue might be causing this error. Use a website checker tool to find out if the website is down for everyone else.
  2. Disconnect from VPN. A VPN can sometimes interfere with network connections. Temporarily disable it using your VPN client.
  3. Reboot your network device. Restarting your router can fix many internet issues. Unplug the power cord of your router and plug it in again after 10-30 seconds.
  4. Clear browser cache. An outdated browser cache can cause connectivity issues. Try clearing the cache and other browser data via Google Chrome’s settings.
  5. Deactivate antivirus and firewall. Some antivirus and firewall software might falsely identify safe websites as dangerous. Temporarily disabling your antivirus program and firewall can fix this error.
  6. Disable proxy server access. Proxies can cause issues too. If you use a proxy, try disabling it and see if the error persists.
  7. Reset TCP/IP settings. An incorrect or corrupted TCP/IP configuration won’t allow you to connect to the internet. Resetting TCP/IP will change your internet settings to default, possibly fixing the error message.

Good luck – we hope that one of the methods has helped you fix the ERR_CONNECTION_RESET error. Feel free to leave a comment if you have any questions or tips.

“ERR_CONNECTION_RESET” FAQs

How do I prevent an “ERR_CONNECTION_RESET” error?

Try checking your network connection, restarting your router, clearing your browser cache and cookies, or disabling any VPN or proxy services to prevent an “ERR_CONNECTION_RESET” error. Another option is to try temporarily disabling any antivirus or firewall software.

Do I need to access my server to fix an “ERR_CONNECTION_RESET” error?

Depends on the cause of the “ERR_CONNECTION_RESET” error. If the issue is related to server-side configurations or network settings, then you may need to access your server or network settings to fix the error. However, there are also some client-side solutions that may resolve the issue without accessing the server.

Author
The author

Hasna A.

Hasna is passionate about tech, culture, and the written word. She hopes to create content that helps people succeed on the web. When not writing, rearranging, or polishing sentences, she enjoys live music and overanalyzing movies.